GT-3600 Specifications


4045TF285B John Deere Tier 3 diesel.
Power: 99 hp (74 kW) @ 2400 rpm.


Fuel reservoir:
44 gal. (166.6 L), locking cap.
Hydraulic oil reservoir: 105 gal. (397.5 L).


Two double-stage main pumps provide 102 gpm (386 Lpm) @ 2400 rpm. One pressure-compensated lift control pump provides 20 gpm (76 Lpm) @ 2400 rpm.
Hydraulic oil cooling: Extra capacity forced-air oil cooler and reservoir designed with internal baffling for atmospheric cooling.
Filtration: Industry standard filtration, including 10 micron return line filter, two 200 mesh magnetic sump strainers and one 20 micron control circuit filter.


Hydraulically powered, motor-in-head, variable speed, independently controlled, and synchronized with machine movement.
Quantity: Four hydraulic circuits and two hydraulic vibrators with mounts included with each machine.


Curb and gutter mold:
One mold standard up to 24 in. (610 mm) wide. Optional molds available for curb and gutter, barrier, parapet, and sidewalk.


Hydraulic lift:
18 in. (457 mm) pressure-compensated hydraulic vertical adjustment with the capability to adjust up to 24 in. (610 mm), with 6 in. (152 mm) manual vertical adjustment.
Sideshift: 48 in. (1219 mm) maximum hydraulic sideshift.


Controls: GOMACO's G+® control system features multi-language capabilities, metric or imperial measurements, color graphics, and a 6.5 in. (165 mm) anti-glare display screen.
Control indicators: Panel-mounted auto control gauges allow operator to monitor control signals as machine follows stringline.
Reverse auto control: Single switch sets controls for automated control with machine traveling in reverse.
Remote control: Tethered remote control handset included for operator convenience.


SUBGRADE TRIMMER (Sectionalized)
Sectionalized trimmer:
Internal hydraulic drive system and 24 in. (610 mm) diameter trimming wheel.
Trimmer wheel rotation: Upward cut.
Width: 30 in. (762 mm) to 66 in. (1676 mm) sectionalized trimmerhead with hydraulic sideshift capability. Right-hand discharge standard.
Sideshift distance: 48 in. (1219 mm) maximum hydraulic sideshift.
Hydraulic lift trimmer: 12 in. (305 mm) hydraulic vertical adjustment with the capability to adjust up to 18 in. (457 mm), with 6 in. (152 mm) manual vertical adjustment.
Optional direct-drive trimmerhead: Trimmerhead is directly driven with a radial piston hydraulic motor which provides a 15 percent increase in torque for more power.


Hydraulically powered, reversible with charging hopper. Pivot mount conveyor with hydraulic lift and positioning.
Length: 15 ft. (4.6 m) between pulley centers.
Width: 24 in. (610 mm).
Belt speed: Variable up to 284 fpm (86.6 mpm).
Belt wiper: Features segmented blades mounted on individual cushions. This allows the cleaning tips to conform to the centers of the belt for constant contact without the need for constant adjustment.
Conveyor mount: Features 36 in. (914 mm) hydraulic slide adjustment with 6 in. (152 mm) hydraulic tilt cylinder and manual pivoting mount (slide and tilt) for negotiating discharge from the ready-mix truck and negotiating grade variations. This allows truck positioning to the front or the side of the machine. Hydraulically powered mount controls conveyor slope.
Hopper: Designed for more concrete capacity to allow slipforming a complete radius without waiting for concrete delivery.


On-board water system.
Capacity: 100 gal. (378.5 L) water tank with hydraulically driven pump, hose, and nozzle.


Three hydraulically powered, gear-driven crawler tracks.
Overall track length: 5.1 ft. (1.6 m).
Center-to-center sprocket/idler length: 40.1 in. (1019 mm).
Track pad width: 11.8 in. (300 mm).
Gearbox reduction: 100:1 gear reduction with two-speed hydraulic motors.
Track speed: Variable up to 42 fpm (12.8 mpm); auxiliary variable up to 125 fpm (38 mpm).
Track tension: Fully automatic, hydraulically locks in on machine start-up, maintaining a steady tension of the track chain.
Leg height adjustment: Each track has 36 in. (914 mm) hydraulic adjustment and an additional manual adjustment of 8 in. (203 mm).
Telescoping leg for positioning right-front track: Hydraulically controlled, allows 24 in. (610 mm) lateral track adjustment range.
Power-slide leg for positioning rear track: Hydraulically controlled, allows up to 40 in. (1016 mm) lateral track movement.
Power-swing pivoting left-front track mount: Hydraulically positions left-front track up to 21 in. (533 mm) to the left or up to 12.25 in. (311 mm) to the right of the straight-ahead position.


Overall length: 22.2 ft. (6.8 m) with conveyor. 17.4 ft. (5.3 m) without conveyor.
Overall height: 8.1 ft. (2.5 m) with trimmerhead.
Overall width: 8.5 ft. (2.6 m) with trimmerhead. 8.3 ft. (2.5 m) without trimmerhead.


WEIGHT (Approximate)
25,720 lbs. (11,666 kg). Weight can vary depending on size of mold and options.



4045HF285F John Deere Tier 3 diesel engine, 125 hp (93 kW) @ 2400 rpm.

Barrier/parapet sidemount attachment. Maximum slipforming height of 50 in. (1270 mm).

Auger provides fast and efficient concrete delivery.

Guillotine-style curb depressor has a straight blade that enters the face of the curb. Hydraulically powered, for use on curb and gutter molds while slipforming through driveways. Can be changed to other molds if they are slotted and clamped to accept the driveway cutout.

California-style curb depressor has a curved blade that enters the face of the curb. Hydraulically powered, for use on curb and gutter molds while slipforming through driveways.

Hydraulic pressure-compensated sideplates.

Additional vibrators and mounts.

Two additional vibrator circuits and controls.

Left-hand discharge trimmerhead.

Trimmerhead direct-drive, radial piston motor provides a 15 percent increase in torque for more power.

Trimmerhead insert sections of 12 in. (305 mm), 18 in. (457 mm), 24 in. (610 mm), and 30 in. (762 mm) widths are available for trimmerhead width to 66 in. (1676 mm) maximum.

Curb and gutter molds will be built to customer specifications. Various mold options are available.

Mold centermount kit, includes drawbar to mount in place of trimmerhead and extension for the rear leg.

High-pressure water system, includes trigger gun control and adjustable pressure unloader for up to 2000 psi.

Polyurethane track pads, 81 pads required.

Radius wheels for use on radius work, saving time on stringline set-up.

3D package for stringless guidance.

Other options are available to customize the machine to accommodate applications and customer needs.








For Additional Information


GT-3600 GT-3600 Curb & Gutter

GT-3600 Photos: Curb & Gutter - Sidewalks & Recreational Trails - Tight Radius - Barrier - Unique Applications

Special Report All-Track Steering & All-Track Positioning

Download The GT-3600 Brochure (PDF)

Download The GOMACO Full Line Brochure (PDF)

GT-3600 Information In: Francais - Deutsch - Español - Italiano