GP-2400 Slipform Paver Applications


A four-track GOMACO GP-2400 concrete slipform paver is adding a 12 foot (3.7 m) wide and eight inch (203 mm) thick lane on I-29 in Sioux City, Iowa.




A contractor is slipforming a half-width concrete overlay with a GOMACO two-track GP-2400 with Leica Geosystems 3D guidance system on the Darr Link near Cozad, Nebraska.

Read more about this project in GOMACO World 42.1.




A GOMACO GP-2400 with 5400 series bar inserter follows a PS-2600 placer/spreader on a project in Hamburg, Pennsylvania.




An exit ramp on I-29 is being slipformed by a four-track GP-2400 concrete paver in Sioux City, Iowa.




A four-track GOMACO GP-2400 is paving a concrete apron on the Abu Dhabi International Airport in the United Arab Emirates.




The GP-2400, four-track, paves a 6.5 foot (2 m) wide by 10 inch (254 mm) thick shoulder with a sidemounted mold.




A four-track GP-2400 slipforms a county highway in Montgomery, Indiana, utilizing Trimble 3D guidance.




A GP-2400, four-track, paves a new access road for an airport.




The GP-2400 with the 3100 series mold with adjustable stainless steel provides the GOMACO finish.




A GP-2400, two-track, paves a 16.4 foot (5 m) wide, eight inch (203 mm) thick slab for a parking lot.




A GOMACO 9500 is placing the concrete over longitudinal steel for the GP-2400 to slipform a scab-on shoulder.

Read more about this project in GOMACO World 40.1.




The GP-2400's pedestal console is hinged, allowing it to shift forward for paving and retract back in for minimum shipping requirements.




A GP-2400 paves over longitudinal steel and is equipped with the GOMACO Auto-Float®.




A GP-2400, four-track, paves a 9.25 foot (2.82 m) wide slab that is nine inches (229 mm) thick with a sidemounted mold.




The operator's platform provides a complete view of the paving operation.




A GP-2400 paves a 0.75 inch (19 mm) thick polymer overlay.




A paving train made up of the PS-2600, GP-2400, and T/C-400 paves an airport strip in a remote area. The airstrip is 10,499 feet (3200.1 m) long.




This GP-2400 paver is slipforming 10 foot (3 m) wide sidemounted shoulder in El Paso, Texas. The scab-on shoulder is 11 inches (279 mm) thick and slipformed over single-mat steel reinforcing.




The GP-2400 is capable of slipforming in tight clearance areas.




The GP-2400 slipform paver has the GOMACO exclusive 3100 series open-front mold with a 14 inch (356 mm) diameter hydraulically-powered split auger.




Stringless systems are plug and play technology with the GP-2400's G+ proprietary software and control system.




This contractor is slipforming 3.5 meters (11.5 ft) wide, and 300 millimeters (11.8 in) thick with their two-track GP-2400 concrete paver on the Plaridel Bypass Road Project in the Philippines.

Read more about this project in GOMACO World 40.1.




This six kilometer (3.7 mi) long section of highway in the Philippines was slipformed with a two-track GOMACO GP-2400.




The GP-2400 was designed for transportability between job sites.










For Additional Information


GP-2400 Slipform Paver

GP-2400 Slipform Paver Specifications

Download The GP-2400 Slipform Paver Brochure (PDF)

Download The GOMACO Full Line Brochure (PDF)